AND-logic circuit with #amplifier

Distribution #box with 4 or 8 sockets;
with built-in signal amplifier,
to connect PNP #sensors in series
and recover any voltage drop.

AND-logic circuit with amplifier - Shield's M8 distributor.

Advantages:

• Led near each M8 socket shows on-off signal status.
• It is possible to put sensors in series with high voltage drop as well.
• Connection of many sensors to the cabinet by a simple 3-pole M12 #connector.
• Single PLC input can get signal from many sensors.

Accessories: special male M8 connector for input exclusion.

#BUS #DISTRIBUTION POINT

The picture shows an M12 connector distribution point for #CanOpen or #DeviceNet bus applications. This distribution box can manage up to 12 circuit branches. It is a cost effective patch panel to connect many bus devices. Compact dimensions and easy to install.

The box is available with many connection circuit options, plugs and/or sockets in any position, even for small production lots.

Can Open, DeviceNet, M12 distribution box

Cover for an #electronic #box

A Distribox with rear #connection can also become the #cover of a box for electronic circuits.
The number and the type of connectors can be changed according to the project needs.
In this way the customer can put inside his own circuit, even of big dimensions.
Here below the most common sizes are listed
(L x W x H mm):
120 x 80 x 55
120 x 80 x 85
160 x 80 x 55
160 x 80 x 85

Shield's cover with plug or socket connectors for electronic box.

Simple box for #electronic #circuits

This box can also be an enclosure for electronic printed circuit board.

Distribox can also become the container of electronic printed circuit board with #cable, or with #connector; polyurethane housing guarantees optimal water resistance.
Tooling modularity allows to eliminate all connectors from the box upper side, or to leave one or more connection males, with necessary poles quantity.

There are several advantages:

• wide range of dimensions, surface and thickness
• Led available
• minimum use of space
• low assemblage cost
• protection degree: IP67

Distribution box with #input and #output connectors of various sizes

SK3FxPD is a distribution #box family with triple line of output #connectors. The output connectors in the same box may be of different sizes and poles quantity. The control connector is a 7/8" of 14 or 19 or 25 poles (M23 of 12 or 19 poles). Caps for dust protection are available.
Advantages:

• reduction of boxes quantity
• no more need of adaptors
• possibility to prevent connection mistake using different sizes and codings.

Shield distribution box can be an alternative or complementary BUS applications.

No more adaptors! Distribution box can be supplied with input and output connectors of various types.

Distribution #box with M12 + 7/8" (M23) #sockets and built-in male 7/8" (M23) control connector

Distribution box with M12 sockets and built-in male power control connector.

These series are extremely multipurpose.
SK2HxPD: double line M12 + 7/8" (M23) female sockets, built-in male 7/8” (M23) control connector.
SK3HxPD: triple line M12 + 7/8" (M23) female sockets, built-in male 7/8” (M23) control connector.
Solutions with 3 or 4 or 5 modules. The male plug control connector can be 14-pole, 19-pole or 25-pole.
Standard or customized connection circuits.
The image shows a solution with 5 modules: the SK2H5PD distribution box with 5-pole M12 #female sockets + 7/8" socket, built-in 19-pole 7/8” #male plug control #connector.

Top mounting Distribox series

Shield – M12 – M8 Series top assembly distribution box.

Distribution boxes,
top mounting M8 and/or M12 sockets,
from 2 to 15 sockets,
1, 2 or 3 signals each #female socket,
with or without signalling Led,
for #connection of #sensors, #actuators, etc.;
special circuits on request.

Triple line Distribox

Space saving
top mounting #distribution #box,
triple line #M8 sockets,
from 6 to 15 sockets,
for sensors or small signals connection, etc.

Triple Line Distribox

SK23 series Distribox + SF23 series Distribox

Distribution box with M8 female socket connectors

#Distribution #boxes,
top mounting #M8 sockets,
from 4 to 10 sockets,
with or without signalling Led,
for connection of sensors, etc.;
special circuits on request.

Distribution box with narrow spacing and M8 socket connectors

Distribution boxes, narrow pitch,
top mounting M8 sockets,
from 4 to 10 sockets,
with or without signalling Led,
for connection of sensors, etc.;
special circuits on request.

SD20 series Distribox + SK20 series Distribox

Distribution box M12 socket with flat profile for application with small space.

#Distribution #box,
side mounting #M12 sockets,
with small space profile,
from 2 to 10 sockets, 1 or 2 signals each socket,
with or without signalling Led,
for connection of sensors, actuators, etc.;
special circuits on request.

Distribution box with M12 socket and top mounting.

Distribution box,
top mounting M12 sockets,
from 4 to 10 sockets,
1 or 2 signals each socket,
with or without signalling Led,
for connection of sensors, actuators, etc.;
special circuits on request.

7/8" and #M23 moulded #connectors with #cable

Round power connectors from 2- to 25-pole. Male, female, flying version and receptacle.

HD and HE series.
Round middle #power connector up to 600V, 12A,
from 2 to 6 poles for power connection,
versions of 14, 19 and 25 poles for signal connection;
female contact + female thread,
female contact + male thread,
male contact + male thread,
male contact + female thread,
with anti-vibration system,
wide cable choice,
single head or extension cable;
application with motors and distribution boxes, etc.

7/8" connectors

#Shield manufactures #connectors for industrial #hydraulic, pneumatic, electrical #automation, illumination, trucks and various construction equipments. These photos show 7/8" circular angled and straight connector series with shielded or unshielded cable. The cable materials can be chosen among a wide choice: halogen free, polyurethane, PVC, silicone, etc. Dynamic or static application. 2, 3, 4, 5, 6, 14, 19, 25 poles.



Gender configurations can be: standard male, female and hybrid male-contacts / female-thread, female-contacts / male-thread. Ratings up to 13A, 600V. IP68 over-molded cables. Clean design.
Receptacle can be supplied with frontal or rear assembly method.

#Spider #Box

The Spider Box is a modular solution: simple connections or complex bonded junctions according to client's design can be wired and over-moulded with an efficient cost/quality rate. Assembling with shielded or unshielded cables. Up to 25 #cables #connections with multiple wires can be linked together. Electronics: standard circuit or built-in custom electronic circuits design are available. Hybrid versions with M8 and M12 connectors + direct cable junctions are also available. It's the solution to reduce the design and cables assembling time in your project.
Some of the main advantages:
- Even a not skilled worker can assemble the machinery electrical parts.
- Easy maintenance for the machinery electrical parts.
- It reduces the stock part numbers.
- Possibility to built-in sophisticated electronic components as well.

Manufacturer of M12 and M8 connectors

Shield manufacturs #IEC 61076, IEC 60947-5-2 M8 and #M12 circular #connectors, angled or straight, with shielded or unshielded cables, halogen free polyurethane cables, PVC or silicone cables, dynamic or static application; circuits: Led or special circuit available. Ratings up to 4A, 250V. Clean design.