#D-Sub connector, small dimensions, with #IP67 IEC60529 protection

Dsub connector with IP67 protection (EN IEC 60529)

Thanks to an innovative lip gasket, JxLF and JxMF series D-sub female connector family guarantees a high degree of #protection against #water and dust.
Can be mounted on any male connector plug already present on the market.
Terminals are crimped to wires, in this way ensure greater reliability compared to soldered or screwed terminals.
The housing may contain resistors or other electronic components, if requested.
PVC or PUR cable, with or without shielding. Standard wires with DIN 47100 colours.
Connection sockets from 9 to 62-pole, reliable and economic.
Angled or straight versions.

EN IEC 60529: IP67. #D-Sub #connector assembly

D-sub IP67 connectors

J series D-sub female connector sockets with IP67 protection degree according to IEC 60529 can be supplied with customized wiring as well:

• two, three or more cables may be overmoulded on the connector
• BUS extensions
• BUS backbone chain
• 9-pole, 15-pole, 25-pole, 37-pole, #Profibus, Interbus, #DeviceNet and #CanOpen applications
• stepping motor driver
• small motors 
• servo motor controller
• video camera
• industrial switch
• fieldbus gateway
• PLC, programmable logic controller,
• encoders,
•  etc.

#Electronic #Box for lighting information

This modular box can contain easily electronic components and lighting signals.

Distribox is a distribution box which can be also used to contain #lighting arrows or coloured #signals.
Distribox series is modular and dimensions can be according to customer’s project.
Advantages:

• Small dimensions
• Weightless
• Good water proof
• High efficiency
• Low consumption
• Design upon request as well

Electronic Box with power #LED #lamps

Shield box with LED lamps. Box dimensions 31 mm x 93 mm. Smaller and bigger dimensions are available.

Distribox is a distribution box which can be also used to contain LED #lights and illuminate dark angles of the #machine.
Distribox series is modular and dimensions can be according to customer’s project. 

Advantages:

• Small dimensions
• Weightless
• Good water proof
• High efficiency
• Low consumption
• Design upon request as well

Cover for an #electronic #box

A Distribox with rear #connection can also become the #cover of a box for electronic circuits.
The number and the type of connectors can be changed according to the project needs.
In this way the customer can put inside his own circuit, even of big dimensions.
Here below the most common sizes are listed
(L x W x H mm):
120 x 80 x 55
120 x 80 x 85
160 x 80 x 55
160 x 80 x 85

Shield's cover with plug or socket connectors for electronic box.

Simple box for #electronic #circuits

This box can also be an enclosure for electronic printed circuit board.

Distribox can also become the container of electronic printed circuit board with #cable, or with #connector; polyurethane housing guarantees optimal water resistance.
Tooling modularity allows to eliminate all connectors from the box upper side, or to leave one or more connection males, with necessary poles quantity.

There are several advantages:

• wide range of dimensions, surface and thickness
• Led available
• minimum use of space
• low assemblage cost
• protection degree: IP67

Distribution #box with #M12 sockets and built-in male 7/8" (or M23) control connector

Classic distribution box family with 4, 6, 8 or 10 #socket #connectors. Sockets can be M8 or M12.
Caps for unused sockets are available.
Control male connector is 7/8" of 14 or 19 or 25 poles (M23 of 12 or 19 poles).
This solution allows to easily change the box without unwiring the whole system.
The picture shows type SK205PD.

The internal circuit can be customized according to customer's request, for instance:

• independent and separated outputs
• series outputs
• parallel outputs
• AND/OR logic wiring
• electronic logic upon request

Wiring box with M12 female connectors and 7/8″ male connector.

#Timers for #condensate drain electrovalves

For #electrovalves with square #connector
EN175301-803 style A (former DIN 43650-A),
ISO 4400;
long life, easy installation and programming;
SMD technology, small dimensions, no maintenance;
adjustable timer setting; multi-voltage;
installation in any position.
Analogue type:
interval time = from 0.5 to 45 minutes, adjustable
discharge time = from 0.5 to 10 seconds, adjustable
Digital type:
interval time = from 0.1 sec to 99 hours, adjustable
discharge time = from 0.1 sec to 99 hours, adjustable

Timer with DIN 43650 connector for condensate drain electrovalve.

#Spider #Box

The Spider Box is a modular solution: simple connections or complex bonded junctions according to client's design can be wired and over-moulded with an efficient cost/quality rate. Assembling with shielded or unshielded cables. Up to 25 #cables #connections with multiple wires can be linked together. Electronics: standard circuit or built-in custom electronic circuits design are available. Hybrid versions with M8 and M12 connectors + direct cable junctions are also available. It's the solution to reduce the design and cables assembling time in your project.
Some of the main advantages:
- Even a not skilled worker can assemble the machinery electrical parts.
- Easy maintenance for the machinery electrical parts.
- It reduces the stock part numbers.
- Possibility to built-in sophisticated electronic components as well.

Manufacturer of M12 and M8 connectors

Shield manufacturs #IEC 61076, IEC 60947-5-2 M8 and #M12 circular #connectors, angled or straight, with shielded or unshielded cables, halogen free polyurethane cables, PVC or silicone cables, dynamic or static application; circuits: Led or special circuit available. Ratings up to 4A, 250V. Clean design.