Electronic Components Box. Small #box for #electronic circuits.

Small box for #PCB (Printed Circuit Board) with electronic components, very high water protection degree, without epoxy resin.
No tooling costs, with reduced labour cost and without potting resins.
This box is a simple and inexpensive solution to coat small electronic circuits with high quality materials (polyurethane).
Cables or connectors can be according to customer’s design; metallic sheaths or special cables are available, the item can also be supplied fitted with connectors according to customer’s request: such as, Tyco, FCI, Deutsch, Molex, Amphenol, etc.

Electronic Box for reducing labour costs

Advantages:

• Overmoulded with PUR (polyurethane)
• Protection degree: IP67
• Simple and low-cost
• Small dimensions
• Very light weight
• Electrical cable exit: single or multiple.
• Cable type according to customer’s needs.
• Possibility to have protection conduit of galvanized steel or stainless steel, for applications where the most reliability and mechanical strength are requested

#BUS #DISTRIBUTION POINT

The picture shows an M12 connector distribution point for #CanOpen or #DeviceNet bus applications. This distribution box can manage up to 12 circuit branches. It is a cost effective patch panel to connect many bus devices. Compact dimensions and easy to install.

The box is available with many connection circuit options, plugs and/or sockets in any position, even for small production lots.

Can Open, DeviceNet, M12 distribution box

Cover for an #electronic #box

A Distribox with rear #connection can also become the #cover of a box for electronic circuits.
The number and the type of connectors can be changed according to the project needs.
In this way the customer can put inside his own circuit, even of big dimensions.
Here below the most common sizes are listed
(L x W x H mm):
120 x 80 x 55
120 x 80 x 85
160 x 80 x 55
160 x 80 x 85

Shield's cover with plug or socket connectors for electronic box.

Simple box for #electronic #circuits

This box can also be an enclosure for electronic printed circuit board.

Distribox can also become the container of electronic printed circuit board with #cable, or with #connector; polyurethane housing guarantees optimal water resistance.
Tooling modularity allows to eliminate all connectors from the box upper side, or to leave one or more connection males, with necessary poles quantity.

There are several advantages:

• wide range of dimensions, surface and thickness
• Led available
• minimum use of space
• low assemblage cost
• protection degree: IP67

#Receptacles

Examples of receptacles for panel applications

#M8, #M12, #M23, 7/8", male plug or female socket, angled or straight for mounting on panel.
Available with unsheathed or sheathed wires, with soldering or for printed circuit contacts.

Distribution #box with #M12 sockets and built-in male 7/8" (or M23) control connector

Classic distribution box family with 4, 6, 8 or 10 #socket #connectors. Sockets can be M8 or M12.
Caps for unused sockets are available.
Control male connector is 7/8" of 14 or 19 or 25 poles (M23 of 12 or 19 poles).
This solution allows to easily change the box without unwiring the whole system.
The picture shows type SK205PD.

The internal circuit can be customized according to customer's request, for instance:

• independent and separated outputs
• series outputs
• parallel outputs
• AND/OR logic wiring
• electronic logic upon request

Wiring box with M12 female connectors and 7/8″ male connector.